Закончите предложения, выбрав
соответствующее окончание
1.The front wheels are on pivots
so...
2.When the steering wheel is
turned...
3.The steering wheel is linked.
4.Most manufacturers use...
5.Steering gear may be...
6.Steering knuckle arms and
wheels are turned...
a. by the tie-rods.
b. rack and pinion type, recir-
culating ball type, warm and
sector type.
d. gearing in the steering system
causes the pitman arm to turn.
e. rack and pinion type.
f. they can be swung to the left or
right.
g. by gears and levers to the front
wheels.

1. The front wheels are on pivots so... g. by gears and levers to the front wheels.
- The front wheels are attached to pivots, which are like hinges. This allows the wheels to move in different directions, such as when you turn the steering wheel.

2. When the steering wheel is turned... f. they can be swung to the left or right.
- When you turn the steering wheel, it causes the front wheels to move. This movement allows the car to change direction by swinging the wheels either to the left or to the right.

3. The steering wheel is linked. b. rack and pinion type, recirculating ball type, worm and sector type.
- The steering wheel is connected to the mechanism that controls the movement of the front wheels. There are different types of steering systems, including rack and pinion, recirculating ball, and worm and sector, which all have different ways of linking the steering wheel to the wheels.

4. Most manufacturers use... e. rack and pinion type.
- The majority of car manufacturers use the rack and pinion type of steering system. This system consists of a rack (a long bar with teeth) and a pinion (a gear), which work together to control the movement of the front wheels when the steering wheel is turned.

5. Steering gear may be... b. rack and pinion type, recirculating ball type, worm and sector type.
- The steering gear, which is part of the steering system, can be of different types. It can be the rack and pinion type, where a rack moves along a pinion gear to control the wheel movement. It can also be the recirculating ball type, where balls help to transmit the steering force. Another type is the worm and sector type, where a worm gear and a sector gear are used to move the wheels.

6. Steering knuckle arms and wheels are turned... a. by the tie-rods.
- The steering knuckle arms and wheels are the parts that physically move when the steering wheel is turned. This movement is achieved by the tie-rods, which connect the steering knuckle arms to the rest of the steering system and transmit the steering force.