Задания английский! As we know, all computer operations can be grouped into five functional categories. The method

in which these five functional categories are related to one another represents the functional

organization of a digital computer. By studying the functional organization, a broad view of the

computer is received.

The five major functional units of a digital computer are:

1) Input— to insert outside information into the machine;

2) Storage or memory – to store information and make it available at the appropriate time;

3) Arithmetic-logical unit – to perform the calculations;

4) Output – to remove data from the machine to the outside world and;

5) Control unit – to cause all parts of a computer to act as a team.

A complete set of instructions and data are usually fed through the input equipment to the memory

where they are stored. Each instruction is then fed to the control unit. The control unit interprets

the instructions and issues commands to the other functional units to cause operations to be

performed on the data. Arithmetic operations are performed in the arithmetic-logical unit, and the

results are then fed back to the memory. Information may be fed from either the arithmetic unit or

the memory through the output equipment to the outside world. The five units of the computer

must communicate with each other. They can do this by means of a machine language which uses

a code composed of combinations of electric pulses. These pulse combinations are usually

represented by zeros and ones, where the one may be a pulse and the zero – a no-pulse. Numbers

are communicated between one unit and another by means of these one-zero or pulse – no-pulse

combinations. The input has the additional job of converting the information fed in by the operator

into machine language. In other words, it translates from our language into the pulse – no-pulse

combinations understandable to the computer. The output’s additional job is converting the pulse

– no-pulse combinations into a form understandable to us, such as a printed report.

1. Просмотрите текст еще раз. Дайте ответы на вопросы, используя информацию

текста

1. What represents the functional organization of a computer? 2. What can we get by

studying the functional organization? 3. What is the function of the input device? 4. What

does memory serve for? 5. What is the task of the arithmetic-logical unit?6. What is the

function of the output? 7. What is the main purpose of the control unit? 8. How do all units

of the computer communicate with each other? 9. What is the additional job of the input?

10. What is the additional function of the output?

2. Найдите в тексте английские эквиваленты следующих словосочетаний

Функциональная организация; действия компьютера; связывать друг с другом;

вводить информацию извне; делать информацию доступной; выполнять вычисления;

выводить информацию; блок управления; выдавать команды; заставлять выполнять

команды; выходное устройство; внешний мир; связываться друг с другом;

комбинация электрических импульсов; холостой импульс; импульсы,

распознаваемые компьютером.

3. Вспомните значение следующих прилагательных и преобразуйте их в

сравнительную и превосходную степени

1 - Small; fast; new; long; late; wide; young; easy; great; dull; rich; bulky; large; vast;

early; old; broad.

2 - Frequent; reliable; approximate; significant; intricate; possible; basic; remarkable;

common; modern; dependent; general; necessary; successful; scientific; universal.

3 - Good; bad; little; many.

ainurpandaa    1   27.11.2020 06:52    10