Silent Metals

A hundred years ago noise on the main streets of the world's biggest cities did not exceed 61 decibels. Today it is 100 and more. Industrial noise is at very high level at many factories, and in some it reaches 90 to 110 decibels.
Noise is an ever growing inconvenience of modern life, and of it is generated by vibrations of metals. These vibrations not only cause noise but can also lead to "fatigue" and consequent failure of a structure.
Research into methods which can minimize vibrations in structures is therefore of considerable importance. There are two methods to reduce vibration in an engineering design; either we make the structure so stiff and heavy that it cannot vibrate significantly, or we introduce "damping" into the structure, that is, we have to introduce some mechanism for the absorption of energy within the system.
To apply damping coating is standard practice today. The damping coatings are usually made of plastics and are applied to sheet-metal shells such as car bodies. This method is often cheap and the advantage is that the coating can be applied precisely where damping is required. But these damping coatings may be efficient for certain sound frequencies and temperatures.
So metallurgists were interested in the possibility of metals that are strong and tough enough to be used in structures. But they must also possess a high inherent damping capacity that is independent of frequency and less temperature-dependent that of plastics.
Scientists want to combine some of the properties, which characterize steel, with high damping capacity of lead and to produce a material that could be used to minimize noise and vibration. This can, in fact, be done with several materials, the most outstanding of which are alloys of manganese and copper. These alloys can be stronger than ordinary steel, with similar toughness and hardness, yet than that of steel.
However, noise and vibration are problems to be faced by engineers. It is seldom sufficient merely to replace a troublesome component with one of a high-damping alloy. The particular characteristics of these "high-damping" structural alloys should be properly employed. As a result, perhaps, the future will be a little quieter - in some respects at least!

Составьте резюме (summary) этого же текста на английском языке. Резюме должно содержать изложение наиболее важных фактов (проблем), обсуждаемых в тексте их решения, результаты исследований и выводы, сделанные на основе исследований.

valeri1232    3   27.04.2020 20:17    14